Stability verification | Expansion function upgrade | Continually updated
Data cable/headphone detection
Identify authenticity in one second
Autonomous judgment algorithm, accurate identification, wire, chip information.
Uniqueness data line detection
Grounding test, internal vagina test, continuity test
Suitable forMicro, Type-C, Lightningthree types of data line detection use
Original colorrestoration
Mobile phones older than 8th generation will lose the original color function after changing the screen.
Available to help APOLLO to repair
Left: Original color not restoredRight: Apollo restored original color
Original screen original color restoration
Connect to the original screen and switch to the photosensitive interface, click OK to read the stored data,
Access the new screen, click down to write data
Screen support models (more models continue to be updated)
7/7P/8/8P/X/XR/XS/XS MAX/11/11PRO/11PRO MAX
Tip:Connect the screen from the right side of the device, don't re verse it.
Original color restoration without original screen
If the original screen is damaged, it is not read or has been replaced and lost
Available to help potential repair assistants to repair the original color
The mobile phone is connected to the computer, and the cover code is read and copied by the hourglass inspection machine
Remove the screen to connect Apollo and connect "potential repair assistant"
Click "repair original color without original screen" on the software and paste the cover code
Click "Restore Original Color"
Vibrator identification code read and write
Connect the original vibrator to the corresponding connector
Copy the data of the original vibrator and write it to the new vibrator
Support model 7G/7P/8G/8P/X
Note:The vibrator is connected upwards as shown in the figure, re verse connection will cause short circuit
The vibrator identification code needs to correspond to the last two digits on the hardware
Logic/baseband chip read and write
Connect the main board and the Apollo board through the flying line (the flying line point map can be opened in the potential repair assistant). Click "Enter the chip programming interface" on the chip reading and writing interface to read the chip data, and the flying line needs to be written to the motherboard Click to write, click to verify data after writing is completed
Support: 6/6P/7/7P/8/8P/X/XR/XS/XS MAX/11/11PRO/11PRO MAX
Note:Data is recommended to be backed up through a computer
The encrypted data of logic chips of models above X can only read the first 2K
Can be connected to iCopy-S double-sided chip test stand
Click to enter the chip programming interface, through the data line
Connect iCopy-S and Apollo one, follow the on-screen instructions
Click to write to the bottom layer, after the writing is completed, click on the data comparison to verify the data
Note:Data is recommended to be backed up through a computer
Battery detection/data repair
Battery scheme, identification of authenticity, data correction, support software over green
Added battery activation, charge and discharge, internal resistance detection, etc.
Support: 6/6P/7/7P/8/8P/X/XR/XS/XS MAX
Original battery data copy
Copy the original battery data to the new battery that needs to be replaced
Avoid compatibility issues
Snap the battery to the corresponding connector of the battery plate,
You can copy and write the original battery data
It can also be directly on Apollo or potential repair assistant
Revise battery data individually
Note:The correction value of the number of cycles required to be greater than the actual number of
And you haven’t connected to Love* Assistant before changing the data
The data can be repaired with an hourglass to view the original data
Back up files on your computer
Connect to the potential repair assistant, which can back up important data to the computer as insurance,
And verify the file after writing to verify whether the writing is complete
Note: It is strongly recommended to back up baseband and logic chip data